STAND-ALONE STATIONS HI-TECH

KWT-01 Constructed from Komals® System of pipes and joints, portable  Work Shop adapts to needs of various industries. Carts are available in 2 designs: 4 x 8 ft workbench-type top surface with storage for 8 ft long pipe sections and bins for holding joints and hardware accessories, or narrower configuration for maneuverability and table-like top. Carts can be manually pushed or pulled via powered tugger vehicles by integral hitch.

STAND-ALONE STATIONS

KWT-02 Create your ideal workstation starting with this kit. This system includes all the necessary components and hardware to construct a single station. Appropriate for all applications. Frame height is 64" tall unless otherwise specified with World Class LED Lighting System with a energy saving of 70%

> WORKSTATION, 30"D x 36"W (Item #1003)
> WORKSTATION, 30"D x 48"W (Item #1000)
> WORKSTATION, 30"D x 60"W (Item #1005)
> WORKSTATION, 30"D x 72"W (Item #1010)
> WORKSTATION, 36"D x 36"W (Item #1004)
> WORKSTATION, 36"D x 48"W (Item #1001)
> WORKSTATION, 36"D x 60"W (Item #1006)
> WORKSTATION, 36"D x 72"W (Item #1011)

STAND-ALONE STATIONS WITH DRAWERS

KWT-08

This table is 4x7 and about 22" high, and rises to about 2 inches above my knees. Not only does it provide a flat surface for assembly, but as you can see, it provides much storage of hardware, supplies and small tools at a central location. The top is made of (2) 3/4" sheets of MDF. The bottom sheet was first cut to finished size and then I drilled counter bore and counter sink holes about 12" on center into this piece. The holes were bored slightly larger than the 8 x 1-1/4" square drive screws I used to fasten the sheets together. The opposite ends of the holes were slightly chamfered so that the sheets would pull tightly together as the screws will cause some "mounding" as they are sunk into the undrilled second sheet of MDF. The second (top sheet) of MDF was cut larger than the bottom sheet and trimmed with a pattern cutting router bit after assembly of the two sheets. No glue was used to mate the two sheets together, which eliminated one opportunity for the top to not be equal thickness throughout.

RTW WORK TABLES

KWT-03 The RTW Table is rugged, stable and ergonomic. The height adjustability range of the work table allows comfort for almost any worker and proves functional for a variety of tasks. 30x60 and 30x72 RTW

> WORKSTATION, 30"D x 36"W (Item #1003)
> WORKSTATION, 30"D x 48"W (Item #1000)
> WORKSTATION, 30"D x 60"W (Item #1005)
> WORKSTATION, 30"D x 72"W (Item #1010)
> WORKSTATION, 36"D x 36"W (Item #1004)
> WORKSTATION, 36"D x 48"W (Item #1001)
> WORKSTATION, 36"D x 60"W (Item #1006)
> WORKSTATION, 36"D x 72"W (Item #1011)

STAND-ALONE STATIONS HI-TECH

KWT-04 Create your ideal workstation starting with this kit. This system includes all the necessary components and hardware to construct a single station. Appropriate for all applications. Frame height is 64" tall unless otherwise specified with World Class LED Lighting System with a energy saving of 70%

ELECTRIC STATION, DUAL LEG

KWT-05 Use this workstation to improve ergonomics. Effortless height 30-45" adjustment with a push button travels the full range . Store up to four height settings with a 180kg capacity with World Class LED Lighting System with a energy saving of 70%

ELECTRIC STATION, DUAL LEG S CLASS

KWT-06 Use this workstation to improve ergonomics. Effortless height 30-45" adjustment with a push button travels the full range . Store up to four height settings with a 180kg capacity with World Class LED Lighting System with a energy saving of 70%

ELECTRIC STATION, DUAL LEG BASIC

KWT-07 Use this workstation to improve ergonomics. Effortless height 30-45" adjustment with a push button travels the full range . Store up to four height settings with a 180kg capacity with World Class LED Lighting System with a energy saving of 70%