DSC 9045 7 9047 Wireless Alarm

This system is designed primarily as a monitored security system. We can use any of the wireless components listed below. The system is the smallest true wireless alarm available on the market today - but features the largest screen to display alarm information (e.g. Intruder Alarm - John's Room). The system only requires connecting to power and the telephone line, attaching to a wall and it is installed! Simply select the detectors of your choice from below, and your property is protected. The DSC 9045 & 9047 sets new standards for wireless security systems. Maximum 32 wireless zones plus 2 hardwired (34 total). 

The TL150 provides two features - an IP communication system for monitoring and a web browser to allow you to use the system from a computer. Using your PC, PDA or Mobile Phone you can connect to the alarm, check status on zones and operate the system. *The TL150 is presently Exclusive to C.S. Solutions*

 

We have been waiting for the release of the DSC wireless vibration detector for such a long time - and now it is finally here! The detector is so new that we have had to photo it for this page, due to the present lack of official material. 

Vibration detectors are generally located on doors and windows at the optimum position for fast and reliable detection of forced attack - with the obvious advantage of being wireless for a minimum fuss or disruption of decor installation. And the built in contact can then be used to monitor the normal opening of the door or window you wish to protect. 

These detectors now provide the opportunity of perimeter protected system for you at an affordable price. The contact signals on a separate zones identification allowing you to get a confirmed alarm (for monitored systems) from a single device. * See note at the bottom. 

Vibration detectors offer an obvious advantage over other forms of detection device in the way they activate your system while the intruder is still on the outside. The intruder must then decide if he or she should continue whilst the system is sounding (and possibly signalling for assistance) or depart before apprehended - and this is generally what happens! *The Vibration Detector is Exclusive to C.S. Solutions*

Vibration detectors are generally located on doors and windows at the optimum position for fast and reliable detection of forced attack.

Vibration detectors offer an obvious advantage over other forms of detection device in the way they activate your system while the intruder is still on the outside. The intruder must then decide if he or she should continue whilst the system is sounding (and possibly signalling for assistance) or depart before apprehended - and this is generally what happens!

As the name suggests, this detector reacts to the sound of shattering glass. The great advantage this detector offers is to protect multiple windows in a room with a single detector. However, should an intruder enter without breaking the glass - the system will not activate.

GA/IBN5520KA

Add fire detection to your system to protect your life as well as your property! I cannot emphasise how important this type of detector is. Note - this detector does not operate on heat alone. Heat detection is designed to increase the sensitivity of the smoke detector.

The FS165H provides very accurate detection in its' monitoring area and is compatible with all Wireless Security Systems.  FS165H is a natural gas and Mixed gas (LPG) detector.  This series works on the "hopping code system" so it has no dip switches making it installable in seconds and able to accept a rotation of over 1,000,000 different system code combinations.

Onelink Wireless Battery Operated Smoke Alarm

Wirelessly interconnect alarms. Battery operated wireless interconnect smoke alarm. Easily link alarms together with the press of a button. When one alarm sounds, they all sound for maximum whole home protection. Photoelectric smoke sensor reduces nuisance alarms from cooking smoke or shower steam. Easy access battery drawer: no need to remove alarm from ceiling to change battery. 10-year limited warranty. Wireless battery operated smoke alarm meets UL standards.

This ONELINK wireless alarm is for you if:

● You want to build a safety network of interconnected alarms in your home without the cost and hassle of wiring

● You want an instructional DVD on the benefits of Onelink Products

 MODEL 9120B - AC Powered Smoke Alarm with battery back-up, silence, latching and Perfect Mount system. Introducing the Revolutionary 9120 Series smoke alarms. They have been redesigned from the ground up. They install faster, perform better and are even smarter than before. All of these improvements help reduce nuisance alarms and save you time and money. Meets codes where an AC smoke alarm with battery back-up is required.

Carbon monoxide is an odorless, tasteless, invisible gas. Each carbon monoxide molecule is composed of a single carbon atom bonded to a single oxygen atom. Carbon monoxide results from the incomplete combustion of fossil fuels, such as wood, kerosene, gasoline, charcoal, propane, natural gas, and oil.

9600 IR Flame Detector
Approved to FM 3260 (2000), the X9800 meets the most stringent requirements worldwide with advanced detection capabilities and immunity to extraneous sources, combined with a superior mechanical design. The detector is equipped with both automatic and manual optical integrity test capability. The detector has Division and Zone explosion-proof ratings and is suitable for indoor and outdoor applications.

- Unequaled false alarm rejection, TDSA
- High Speed capability
- Class A wiring per NFPA-72
- Automatic, manual or magnetic optical integrity (oi) testing
- 3-year warranty on sensor and electronics
- FM, CSA, CENELEC, CE, VDS, CNBOP Approvals
- EN54-10 Certified
- Output Options include: Relays, 4-20 mA, EQP Addressable, and Pulse Output*

*When pulse output is specified, the infrared (IR) flame detector is for use in controller based systems. The pulse-output model can replace existing Det-Tronics controller based flame detection systems that generate a pulse output. Compatible controllers include: Series R7404, R7405, 7494, and R7495 Controllers.

ICC4701GA /ICC5402FA/ICC5402GA/ICC54

02GAI/

The M12 professional smoke detector can be programmed to any one of the following detection methods by means of an internal DIL switch.

Optical

Optical + Rate of Rise

Rate of Rise

Fixed temperature 77°C

Technical Specification

Depth = 56mm, Diameter = 100.5mm

Operating voltage = 10 - 16v (compatible with 12v alarm systems)

4 wire connection

Current consumption = 0.5mA quiescent, 14mA alarm

Visual Indications

Non-alarm pulse every 10 secs (optional)

Red Continuous = alarm

Yellow continuous = fault (cleaning required)

Ambient temp (max)

Opto mode = 60°C

Opto-heat mode = 45°C

Rate of rise mode = 45°C

Fixed temp mode = 60°C